for pc card v ertical housing for cables soldering conforming to pcmcia/jeita soldering type15-contacts female cable connector with backshell rmc-e15f4s-lc5-m( )( ) configuration of product part no. rmc -e 15 f4s- lc5- m ( ) ( ) ???? ???? ? series name ? e: emi-filtered ? no. of contacts: 15 ? f4s: soldering type, female, for thin wire (awg#30, #32) ? lc5: forms of housings, outside diameter of cable is 3 - 3.5 mm. ? m: one-piece molded key forms: a: a type, b: b type ? forms and locations of keys locations: 12: 12, 13: 13, 23: 23, key-less ? insulator colors of male connectors applicable only to models with the mb form of key (for the models with other key forms, these insulator colors are all black.) blank: brown, bk: black mating connectors t ool: (refer to page tool-12) : refer to the table shown 321 5.2 4.8 0.8 0.814=11.2 5 5 r2.6 components ? metal cover a ? cable cover ? metal cover b ? f emale connector rmc-e(a)15my-om ( ) -m ( ) rmc-e(a)15my-om ( ) -m ( )3 rmc-e(a)15my-om ( ) -m ( )1 rmc-e(a)15my-om ( ) -m ( )2 locations of polarization keys rmc-e15f4s-lc5-m( ) rmc-e15f4s-lc5-m( )12 rmc-e15f4s-lc5-m( )23 rmc-e15f4s-lc5-m( )13 part no. mating connectors a a12 a23 a13 identification examples - 12 23 13 key location use of awg#28 or #30 is recommended. (for use of other awg#, consult the dealer.) after soldering, cover the soldered area with insulation such as shrink tube. the outside diameters of the cables are shown here only for reference. this model may be not applicable to some type of cables. the color of the housing is black. this model requires a bushing for assembly with a cable harness. for the fo rm of the bussing area, because there is reference figure, inquire. some models may not be quickly supplied depending on the contiguration of part number (key position). for the availability of the model required consult your supplier. etc... etc... etc... etc... 17 4 17.5 4.7 ref. label side (one side) 18.8 20.5 ref. h o n d a japan 15 1 contact pos. no. ? ? ? ? pos.#15 pos.#1 others wire wrapping crimping soldering idc press-in smt dip
|
